5 Great Challenges You’ll Face During Any Bathroom Remodel (And How To Solve Them)

5 Great Challenges You’ll Face During Any Bathroom Remodel (And How To Solve Them)

 In a home renovation, the bathroom is often subject to a sharp intake of breath from project planners, labourers and homeowners alike. It goes without saying that a bathroom remodel is one of the more challenging aspects of renovation, fraught with challenges and potential disaster.

In this post, we’ll draw on some interior design expertise to outline how you can solve these issues during the remodel, leading to a stress-free new bathroom for any type of property.

Challenge #1: Dodgy plumbing

It’s not unreasonable to expect that the previous owners’ plumbing work isn’t the best, so you should prepare for a longer-than-expected bathroom remodel if some pipes are leaky or rusty.

Make sure you budget for these setbacks and they won’t be nearly as annoying when they arise mid-project with half a bathroom torn out and a family’s home life totally upended.

Challenge #2: Damp, mould and horrors untold

A large percentage of the UK’s housing stock is very old indeed. 20% of homes in the UK were built before 1919, so it follows that such homes might have some issues with damp after standing proud for 99 years or more.

Ground floor bathrooms might suffer from rising damp, which seeps up from groundwater – but they’re more likely to suffer from damp resulting from some less-than-perfect plumbing following almost a century of use.

For your bathroom remodel, you should first wipe up any mould with bleach-based spray, then think about ventilation solutions such as a more powerful extraction fan (if your bathroom doesn’t have a window, common in some converted Victorian terraced houses) or even some anti-damp sealant that’ll banish the problem for the long term.

Challenge #4: A drainage disaster

An improperly fitted drainage system can make the above problem a whole lot worse, and is often the source of great plumbing peril. An aesthetic upgrade to a bathroom can be ruined by an old shower drain blocked up with decades of hair and other detritus, so your first port of call is to unblock and clean, as this may well give it a few more years of use.

If you have to replace the whole bathroom drainage system, make sure you have a professional in to do it properly. This will ensure that the process happens a lot more quickly and disruption in the home can be massively reduced. A proper drainage system is a cornerstone of a damp-free, hygienic home – so don’t do it on the cheap.

Challenge #5: Being unrealistic

Your dream bathroom might be a luxurious, spacious affair with plenty of indulgent touches. However, you might end up having to compromise with regards to space, as bathrooms, especially in older houses, tend to be on the small side.

Some bathroom supply companies have started to use AR smartphone apps so that potential buyers can visualise exactly how that new toilet or whirlpool bath will fit in the bathroom, solving this problem. However, for now, a foolproof option is measuring out the whole space and working out the ergonomics of everyday use, so you’re not left with a new bathroom that’s awkward to navigate.

 Once these challenges have been addressed, you’ll be free to embark upon a bathroom remodel that’ll leave your clients with a superb, long-lasting and functional part of their home.

Author bio:

Moosa Adam works at 1 Click Bathrooms, the UK’s online one-stop shop that helps homeowners build their dream bathroom piece by piece.

The post 5 Great Challenges You’ll Face During Any Bathroom Remodel (And How To Solve Them) appeared first on http://ukconstructionblog.co.uk

How to avoid winter roofing issues

How to avoid winter roofing issues

Sometimes, when we think about winter and getting the house ready for it, the last part of our properties that we think of is the roof. We’re far too excited about getting the Christmas tree out of the loft and whacking the heating up full blast.

But just stop for a minute to think about what could possibly make or break the heat in your house – the roof. Heat rises naturally, so the quality and state of your roof can really make a difference to how warm you are this winter.

Sometimes, there is just no competing with the weather or nature, but hopefully, we can help you to find a way around it. Here are some of our top tips on how to avoid winter roofing issues and make sure your roof is truly ready for the coldest and most adverse time of year.

If you think your roof could be in need of professional help, have a look at these roofers in Newcastle upon Tyne.

Clear your gutters of clutter

This may be a step you’ve never even thought of, but it’s very simple and surprisingly effective in keeping your roof in tip-top shape this winter. All that you need to do is clear the gutters and roof of any debris such as leaves and dirt, and check regularly.

This will prevent water issues from within your pipes, and can also stop the impact of wintertime icicles from being so great. If icicles are left to grow, they can be a danger to the homeowner themselves and the quality of their pipes.

Invest in a high standard of ventilation

Condensation in the attic doesn’t just look unsightly – it can also cause significant damage if left to build up. We therefore suggest investing in a proper ventilation system that will help to prevent condensation and maintain heat, as well as cut down on your repair costs in the future.

Keep an eye and ear out for snow damage

One of the most common problems for roofs during the winter is the build-up of snow and ice, which if you’re from the North East, is a problem you’ll know all too well.

Problems usually start when the snow level reaches approximately two feet. The weight from snow can cause significant problems for your roof, including structural harm, ice dams and even potentially roof collapse.

Some things to look for regarding this issue are cracks, sagging or leaking. Listening out for sounds of popping or cracking is also a good indicator of damage, as are doors that stick.

Be mindful of the scope for wind havoc

Strong winter winds can also have a majorly negative impact on your roof. If the winds are strong enough, they can cause all sorts of wintertime debris to potentially puncture your roof.  A puncture in your roof can be extremely damaging and certainly will not keep your house warm!

If such problems occur for you, make sure you get in touch with suitably qualified and experienced roofers in Newcastle upon Tyne.  Don’t delay when this happens, as it is better to sort out a problem as soon as it appears and nip in it in the bud.

The post How to avoid winter roofing issues appeared first on http://ukconstructionblog.co.uk

Northumberland Block Paving Project

Recent Northumberland Block Paving Project

Northumberland Block Paving Project, the job consisted of creating a new driveway 210m2. We used grey block paving and combined it with a charcoal grey border to give a more creative look. The lights down the side of the driveway also added to the overall finished look.

The overall result looks great and the homeowners were pleased with the finished result. You can see the finished driveway on the photographs below.

 

Why Choose Us For Your Block Paving Installation?

All the products we use are supplied by quality leading manufacturers, in addition, they all come with excellent product guarantees. We are also on the Marshalls Register for Accredited Landscape Contractors and Driveway Installers. For your information, Marshalls is a National network of independent installers. Anyone on this register has to follow strict guidelines and they are strictly vetted and monitored by Marshalls. Each companies levels of competence and work are constantly assessed giving homeowners peace of mine they are choosing a reliable company.

Furthermore, we offer a huge choice when it comes to block paving for designs, colours and textures.  Working in the landscaping industry for almost 40 years has given us a  great eye for detail. Therefore we can certainly help when it comes to design and choosing the right colours, textures to tie in with your property.

Other than block paving, we offer a wide range of other solutions such as permeable paving, stone and the latest resin bound driveways.

Complementing your driveway installation

Being Landscapers in the North East, we can also offer a wide range of other services which can complement your driveway installation. 

• New Turfing
• Artificial Lawns
• Garden Walls
• Patio Paving, Pathways & Steps
• Planters
• Decking
• Fencing & Gates
• Seating Areas
• & Much More

Over the years, not only have we carried out many projects to domestic households, but we have also carried out a lot of work in the commercial sector too.

Financing your block paving project

For your information, we offer a range of finance solutions for your block paving installation. If you would like to find out more about these solutions, please visit our  Finance Page.

Free quotations

Finally, if you would like a quotation for your project, you will find all our details on our contact page. 

Keep informed of all our latest news

If you would like to keep informed of all our latest news, projects and promotions please join us on Facebook

The post Northumberland Block Paving Project appeared first on Driveways, Block Paving, Patios, Newcastle, North East | Driveway Company UK.

Engineering sector’s astonishing gender pay gap

Research conducted by one of the UK’s largest accountants has revealed that men in engineering earn up to 30% more than women in the same roles.

Hemel Hempstead-based SJD accountants has analysed salaries of both male and females in the sector revealing some astonishing figures.

According to the analysis females with job titles such as mechanical engineer or maintenance engineer earn almost a third less than males with the same occupation.

Derek Kelly, CEO of Optionis which owns SJD Accountancy said: “The gender pay gap has been a topic of increasing conversation, putting the difference in salary into real terms has been shocking.

“This information now highlights the genuine impact that this can have not only on employees but their families and long-term prospects.”

The gender pay gap has been an increasingly important and developing conversation for a number of years within the media and government.

Increasing pressure has been put on businesses to disclose their gender pay gaps and redress the balance to aim for more equal pay.

The survey by SJD Accountancy saw more than a 1,000 contractors questioned, and data gathered on their salaries to create a better picture of which sectors are closing the gap and which are still struggling to find parity.

To find out more details about your industry and the gender pay gaps SJD has launched an interactive tool, visit www.sjdaccountancy.com/gender-pay-gap-tool for more information.

Mr Kelly added: “The tool helps to give workers, whether in permanent or temporary roles, more of an insight into the pay gap within their industry. This improves understanding of the pay issues within certain sectors.”

The post Engineering sector’s astonishing gender pay gap appeared first on http://ukconstructionblog.co.uk

Timber championed with the launch of WoodFest

The North East will celebrate everything built with wood as the first WoodFest comes to Newcastle in December, with an exciting line-up of events organised by the UK timber industry’s campaign, Wood for Good.

WoodFest Newcastle will bring together architects, engineers, placemakers, planners, developers, contractors, politicians and local businesses specialising in timber to promote the innovative and striking ways that wood can be used in the built environment in the North East.

Christiane Lellig, Wood for Good campaign director, said:

“The first in a series of regional WoodFests, this as a fantastic opportunity to bring all those involved with the built environment to explore what industry and politics can achieve together.

“Each event is a chance to learn and share about the use of timber in architecture, particularly around health and wellbeing and offsite construction. It provides a platform to discover what’s happening in the region and to be inspired by timber design.”

The week begins with a behind-the-scenes tour of wood-based materials manufacturer, Egger’s site in Hexham on 10 December. In the evening, Dr Oliver G.F. Jones, architecture professor and expert in human-environment interaction at Northumbria University, will give the keynote speech at a seminar on wellbeing, residential design and healthy homes. Taking place at Ryder Architecture’s home in Cooper’s Studios, Westgate Road, Newcastle, Dr Jones will be joined by a panel of experts including local housing providers and design professionals to explore biophilic design, light, space and air quality among other issues.

Offsite construction steals the show on 12 December with an evening seminar debating whether modern methods of construction are the future for homes in the North East. Hosted by Ryder at Cooper’s Studios, an expert panel will explore Home England’s strategic plan incorporatin g offsite construction and will ask if it’s the silver bullet to deliver much-needed homes.

A site visit to the unique self-build home, Shawm House, takes place on 11 December. Designed by Newcastle-based MawsonKerr Architects, the timber home won four regional RIBA awards, a national RIBA award and was shortlisted for Grand Designs ‘House of the Year’ in 2017. This is a rare opportunity to hear the homeowner’s story and experience the house for yourself.

Taking place throughout the week is an exhibition at Cooper’s Studios, exploring healthy buildings and driving the design and construction quality agenda through the use of modern methods of construction.

The finale for WoodFest Newcastle is the Superwood Conference on Friday 14 December at Northumbria University, hosted by Confor. Looking at how forestry and timber can drive a low carbon economy, the conversation will explore the opportunities for increasing forestry in the North East and the lessons that can be learned from Scotland.

Speakers include Paul Brennan, MEP for the North East, Adam James from Ryder Architecture, Councillor Peter Jackson, leader of Northumberland County Council, Dr Dan Ridley-Ellis from Edinburgh Napier University, Beccy Speight from the Woodland Trust, Neil Sutherland from Makar, Stuart Goodall from Confor, Simon Hart from Egger Forestry and Christiane Lellig from Wood for Good.

WoodFest Newcastle is organised in collaboration with regional partners Constructing Excellence, Egger, Mawson Kerr, RIBA North East, and Ryder Architecture.

Book your place for the WoodFest Newcastle events here: https://woodforgood.com/index/woodfest-newcastle/

More information will be released soon about other regional WoodFests taking place throughout the country in 2019.

If you would like to get involved in WoodFest please contact Wood for Good campaign director, Christiane Lellig, at christiane.lellig@woodforgood.com

www.woodforgood.com

 

The post Timber championed with the launch of WoodFest appeared first on http://ukconstructionblog.co.uk

Work wellbeing — 5 office hygiene hotspots

Despite a rise in remote working in recent years, many of us still trek to our trusty offices each day to make a living.

And while we’re earning a crust, we’re also crumbling because of work-related health issues like backache, eyestrain, stress, the cold and norovirus.

But there are a few simple office design and equipment adjustments progressive employers can make to mitigate risks.

If you’re concerned about work wellbeing, here’s how to optimise five office hygiene hotspots.

1. Desk

Desk surfaces, keyboards and the nooks and crannies behind monitors host hordes of bacteria if they’re not regularly cleaned — so keep a stash of anti-bac wipes in your desk drawer to stop their spread.

But simply sitting in a sedentary position for hours on end impacts your health too — according to the NHS, it slows the metabolism, reduces your ability to burn fat and causes weaker bones and muscles.

So it’s worth enquiring if your employer might buy a sit-stand desk from a company like Posturite which may make you healthier and more productive.

2. Toilets

We would all like to think that the toilet hygiene standards of adult office workers are impeccable — but sadly, anyone who’s worked in a corporate environment for an entire career can tell you this isn’t always the case.

And while no one can force people to wash their hands, providing adequate supplies of soap and strong hand dryers should provide encouragement and combat the spread of bacteria.

A dryer such as a Dyson airblade is simple to use and so swift that it only takes a few seconds to work.

3. Kitchen

The office kitchen is a pleasant sanctuary where colleagues can catch up for a chat over a coffee and take a break form the hustle and bustle of a busy day.

But communal biscuit tins, teabags and mugs are often breeding grounds for all manner of bugs which spoil the tea party in no time at all.

So it’s wise to install soap dispensers from a firm like Deb in kitchens as well as in bathrooms — as well as reserving cups and cutlery for your exclusive use.

4. Breakout area

Many modern offices feature a breakout area — a comfy, informal social space that’s perfect for casual catch-ups with colleagues and extracurricular activities like reading groups and bakery sales.

But beds might soon be slotted in alongside sofas and tables to optimise rest and ramp up performance.

Futuristic suppliers like MetroNaps are now installing sleep pods in offices that enable staff members to have 40 winks in complete comfort and recharge their batteries.

5. Reception

A clean and tidy reception enables any firm to create a fabulous first impression for visitors, but it’s also the frontline against dirt and detritus dragged indoors from outside.

But the solution is simple and cost-effective — place a durable and well-designed doormat at the entrance.

Order floor mats from a specialist like Kleen-Tex to provide a warm welcome that also wipes out germs.

Get to grips with health and hygiene in these five office areas for a workforce that’s fit, healthy and focused.

The post Work wellbeing — 5 office hygiene hotspots appeared first on http://ukconstructionblog.co.uk

4 Must-Know Strategies To Weatherproof Your Site This Winter

With UK weather predictions forecasting the coldest winter the country has seen in 10 years, no industry is likely to face the harsh effects of the snowy season more so than the construction sector.

With adversity on the horizon, it’s time to start thinking about practical solutions to limit the impacts of this winter’s cold grip, by putting safety measures in place to help weatherproof both the construction site itself and all those working on it.

From minimising speed limits around the site to reduce the risk of accidents, to advocating the importance of staying warm to your staff, in today’s post, we’re exploring 4 must-know strategies for protecting your site come rain or ice.

Prioritise safety measures

When it comes to protecting your site from harsh weather conditions, planning is key to preventing a wide variety of potential disasters. Make keeping an eye on weather warnings a priority in order to take the necessary measures and eliminate as many dangers as early as possible.

 

Depending on the types of vehicles used on your site, speed limits often allow certain vehicles to move at speeds of up to 20 mph. So, when it comes to implementing strategies to minimise the potential risks, why not consider reducing the limit to 5 mph? While initially this hack may appear to reduce efficiency, this easy-to-implement procedure is just one of many temporary measures that can minimise on-site risks and will, therefore, benefit both your workers and the overall efficiency of the project in the long run.

Provide suitable storage spaces

In sub-zero temperatures, fragile equipment and the protection of your workers’ personal belongings become a priority. If exposed for too long, expensive and integral pieces of equipment run the risk of being hit by the harsh weather conditions and, in many cases, can face the effects of damage and erosion.

With this in mind, when it comes to maintaining the usability of both vital construction equipment and your workers’ personal belongings, having somewhere secure to store your property is crucial. Installing weatherproof lockers to shield your possessions from the rain and snow will not only help to future-proof your equipment, but also allow your colleagues to come to work safe in the knowledge that their belongings are protected from any spontaneous showers the day brings.

Protect your staff from the elements

We all deserve a much-needed break at work, and, when it comes to the unforgiving winter weather, short breaks away from the cold can be crucial to keeping your workers’ spirits high and their health strong.

By introducing sheltered areas filled with hot drinks, and having food supplies at the ready so that snacks are taken care of, your workers will be encouraged to keep warm – aiding both their physical health and their mental wellbeing. When it comes to prevention, education is key. Prop up informational posters around your break area to inform your staff on the symptoms of cold-induced illnesses and recommendations for how to prevent these from occurring.

Promote weather-appropriate attire

Additionally, when it comes to protecting your on-site workers, what they wear can make the difference between a runny nose and a sleepless night. With bitter, icy winds and freezing cold temperatures set to become the norm this season, dressing appropriately is vital to keeping fit and healthy on the construction site.

Encourage your team to not only protect their head, feet and hands from physical dangers with PPE equipment, but also to dress with extreme weather conditions in mind. Thick socks, sturdy boots, hard hats and warm gloves will keep some of the most heat-loss prone areas of your workers’ bodies regulated come the harsh winter months.

While preparing for the on-site effects of winter’s inevitably harsh weather conditions, it’s crucial to follow government advised restrictions and regulations, as well as using your own initiative. If the weather forecast predicts harsher conditions the night before than initially expected, make the executive decision to protect the safety of yourself and your staff by safeguarding your site however needed. Hang it there – it’ll be summer before you know it.

 

Author bio:
Simon Mitchell has run successful companies in Europe and the US that are focused on delivering exceptional value to clients – while Action Storage offers a diverse range of storage products, along with the technical expertise to help clients’ businesses operate more efficiently. In Simon’s words, that’s a rewarding place to be.

The post 4 Must-Know Strategies To Weatherproof Your Site This Winter appeared first on http://ukconstructionblog.co.uk

TIMco BAGS ‘BRAND OF THE YEAR’ AND ‘SUPPLIER OF THE YEAR’ AT THE NBG AWARDS 2018

On 13^th November 2018, the National Buying Group (NBG) Awards evening saw TIMco win the coveted title of ‘Brand of the Year’ in recognition of their excellence in the following categories: brand, product & service. This is the second consecutive year that TIMco has won this prestigious award.

The award was voted for by the whole of the NBG membership and all brands and suppliers were considered. This win secured TIMco’s title as the overall winner of the year.

TIMco was also awarded the title of ‘Supplier of the year’ in the Decorating and Hardware, Category at this year’s awards ceremony. This is an unprecedented sixth consecutive year that TIMco has won the award and the seventh time since TIMco started supplying the buying group in 2011.

The national awards are designed to recognise excellence in the given category as well as the support and service the supplier offers to NBG’s members.  The awards were presented at a Gala Dinner held at the Cunard Building Liverpool at the close of the NBG’s Annual Conference for 2018.

Simon Midwood, Managing Director of TIMco comments: “We are delighted to have been once again named as NBG ‘Brand of the Year’ and also to have been awarded ‘Supplier of the Year’ for our category for the sixth consecutive year. This is a fantastic achievement for TIMco and a testament to the team’s efforts to deliver excellent products and services to NBG members.  We’re committed to our strategy of being the supplier that supports independent merchants and intend to continue to build on these relationships by further extending our product portfolio and the high levels of service we are proudly able to offer members. We are extremely grateful to NBG for this recognition and their continued support to TIMco.”

The post TIMco BAGS ‘BRAND OF THE YEAR’ AND ‘SUPPLIER OF THE YEAR’ AT THE NBG AWARDS 2018 appeared first on http://ukconstructionblog.co.uk

3 Key Things To Do To Keep Your Porous Asphalt Pavement Looking Brand New

Porous asphalt is a popular paving choice for many reasons. It's cost efficient, eco friendly and considered an EPA best practice. Porous asphalt pavement has tiny holes that allow water to percolate through it into the soil below. This helps with storm water runoff after a heavy rain. The key to keeping porous asphalt looking new is maintenance. Proper maintenance done on a regular basis will keep the porous asphalt pavement looking and functioning like new for many years. 



1. Sweeping Your Porous Asphalt Clean

The first thing is to keep debris off of your new asphalt driveway or asphalt parking lot by sweeping it on a regular basis. With a driveway, the owner can sweep it with a broom periodically (say once a week when doing yard work) or whenever necessary to keep it clean of debris. With a parking lot, the owner may need to have a vacuum service come every day or a couple of times a week or month depending on how busy the parking lot is. Where grocery stores, restaurants, and especially fast food restaurants are located, the parking lot may need daily vacuuming because people leave litter and debris behind. But the owners, on a case-by-case basis, must determine the requirements for each parking lot. 



2. Inspect Your Pavement Surface After Large Storms

After heavy rainfall check for surface ponding that might indicate possible clogging. You can reduce potential clogging debris sources by limiting deciduous trees and bushes. Perimeter berms and permeable boarders can also be used to inhibit off-site runoff to the permeable pavement to reduce potential clogging.

3. Power Wash Your Porous Asphalt

The second thing is to power wash the porous asphalt pavement periodically. Power washing will clean small particles of debris that have blocked the tiny holes in the asphalt, preventing water from draining through the pavement. In cold climate areas where sand is used in the winter, power washing may be necessary more often than with other areas where sanding does not occur. 

Also, areas that tend to have higher humidity may need power washing more often because of mossy or moldy growth that blocks the holes. The owner or maintenance supervisor will be able to tell when power washing is needed because water will not drain properly through the pavement. The same is true with a driveway; when the water does not drain properly, the owner should realize it is time to power wash the driveway. 



After power washing the pavement, a good vacuuming or sweeping will be necessary to get all of the lose debris cleaned up. Once completed, the pavement will be returned to a nearly new condition, both in appearance and in functionality. Over time, a regular maintenance schedule can be established that will keep the pavement in good condition for years to come.

If you have any questions about the benefits of asphalt paving or are interested in a free asphalt paving estimate, please contact us today!

With over 75 years of  paving experience, from highways to driveways, we are your local source for all of your paving needs. Wolf Paving offers professional paving services from Milwaukee to Madison, and everywhere in between, including all areas around: Sun Prairie, Oconomowoc and Waukesha.

It’s never too early or too late to request a free paving estimate. Call Wolf Paving today. For the Milwaukee area, call us at 262-965-2121. For the Madison area, call us at 608-249-7931.

The post 3 Key Things To Do To Keep Your Porous Asphalt Pavement Looking Brand New appeared first on https://www.wolfpaving.com/blog

Feeling the chill? How to perform an energy efficiency check on your home

Is your home energy efficient? That’s a question most people don’t know the answer to, yet keeping an eye on your energy efficiency is a useful – and surprisingly easy – thing to do during winter.

By taking our advice, you could save substantially on your winter bills – a chance that most people would jump at, especially since Christmas is fast approaching.  Read on and follow our tips to perform your own energy checks and hopefully find a few ways to keep your home warm and your bank account happy this winter.

Check insulation…

This one is a must for keeping your home hot and your bills…not.  Heat loss through your roof and through the walls could mount up significantly if your level of insulation is below the recommended amount for your property.

While insulation is indeed an expense, it is a worthwhile expense in the long run, as the savings build up in just a year or two. It could also be worth you looking into your roofing material while you’re checking the insulation.  A roofing company in Yorkshire can help with this.

Lighting…

On average, lighting accounts for about 10% of your energy bill. Given this figure, you should definitely consider looking at your light bulbs. To save energy, it’s worth thinking about replacing standard bulbs with more energy-efficient bulbs, such as light-emitting diodes (LEDs), as they can drastically reduce your energy use.

Heating controls…

Inspect your heating and cooling equipment at least once a year to keep a sufficient check on your energy efficiency. You should think about replacing any equipment that is 15 years old or more.

Like with the insulation tip, a new unit would be an expense of sorts – but, given the money you’ll save in the time after the purchase due to the natural efficiency of a new boiler, it seems more appropriate to call the expense an investment.

Check your electricals…

This one is incredibly useful for energy efficiency.  Often easy to ignore thanks to the convenience of leaving appliances on standby, it really is worth switching things off and unplugging them when they are not in use.  Consider unplugging the item entirely, as this will prevent phantom loads, or change the settings on your device to allow for a more economical performance.

Call in a professional…

After you’ve completed your DIY auditing, think about calling in a professional. While the tips we’ve mentioned here will go a long way towards gaining you substantial improvement on your energy efficiency, it is also useful to call in someone who has a sharp eye for detail of this kind and could really save you money and energy.

Don’t let this discourage you from doing your own checks, though. Your DIY auditing can, in fact, help the professional give a more in-depth assessment of the efficiency of energy in your home.

For more information and tips on performing your own energy efficiency checks this winter, have a look at this useful page on the website of housing charity Shelter.

The post Feeling the chill? How to perform an energy efficiency check on your home appeared first on http://ukconstructionblog.co.uk

1,400 construction workers committed suicide between 2011 – 2015

Mental Health In Construction

 

• Over 1,400 construction workers committed suicide between 2011 – 2015.
• Construction trades have the highest number of suicides of any profession.
• Risk of suicide for those working in building and construction trades is 1.6 times higher than the national average.
• More than a quarter of construction employees have considered taking their own life.
• Workers admit to suffering in silence.
• Many within the industry suffer in silence due to cultural expectations.
• Many workers feel forced to “deal with it,” not seeking out the help they need, and symptoms get worse.

The stats surrounding mental health in the construction industry are so shocking that we thought it was important that we highlighted the issue.

The construction industry has the highest number of suicides of any profession with 1,400 workers taking their own lives over the course of only four years. One in seven workers knows a colleague who has taken their own life and many more workers have considered it. The risk of suicide for those working in the industry is 1.6 times higher than the national average, but what is the cause of this and what can be done to reduce these horrific figures?

Suffering In Silence

One big factor that jumps out of the many surveys that have been conducted around this topic is the fact that many workers have admitted to suffering in silence due to cultural expectations. They feel like they cannot talk about their troubles and that, if they did want to speak to someone about it, that there is simply nowhere to do so.

Normally if you are struggling at work you turn to your employer for help. However, in this industry, it doesn’t seem to be the case with workers stating that they would not turn to their employer due to “fear and stigma” of the subject and that as many as 1 in 5 say they felt their job would be at risk if they did so. It seems to be so bad that 90% of workers who’ve considered suicide or know a colleague who has committed suicide, do not turn to their employer for support. As a result, many workers feel forced to “deal with it,” not seeking out the help they need, and symptoms get worse.

 

It’s Not Just The Guys That Are Struggling

Women are finding it equally tough to cope with mental health issues too. 45% of women workers said their mental health was average to poor at present, with 43% saying they had experienced reduced productivity and 75% had experienced loss of sleep too.

 

So, How To Help Workers?

After compiling the responses from the multiple surveys on mental health in the construction industry, it’s clear that there are three main areas that need to be improved. The first is to have staff training to recognise early signs of mental health, as 73% of respondents felt their employers lacked this skill. Second is to raise awareness of mental health in the construction industry. A massive 83% of workers agree that there isn’t enough out there at the moment. This will also decrease the stigma of mental health. And finally, there need to be more outlets to enable workers to talk about their struggles. Two-thirds of workers believe this would help with another 43% asking for one of those outlets to be an anonymous helpline.

If you are struggling with a mental health issue there are many ways you can find help. Your GP will be able to make an initial diagnosis and point you in the right direction for further treatment. There are charities and third-party organisations that offer free help and listening services such as the Samaritans and SANEline. However, if you are more open about talking about how you are feeling, always talk to friends & family as they will know you better than anyone. Another route could be co-workers or your employer as they’ll be able to relate work-wise with your issues. Whichever options you choose, the first step is to just talk about it.

The post 1,400 construction workers committed suicide between 2011 – 2015 appeared first on http://ukconstructionblog.co.uk

https://t.co/HswTpTXLj7 thanks for following us! Have a great day :) #pavingcontractor

https://t.co/HswTpTXLj7 thanks for following us! Have a great day :) #driveways #pavingcontractor

— Driveway Contractor (@drivewaysuk) November 19, 2018

from Twitter https://twitter.com/drivewaysuk

November 19, 2018 at 06:46AM

Gilbert-Ash Completes Extended Arnold House in Tech-City, London

Award-winning UK construction, refurbishment and fit out contractor, Gilbert-Ash, completed the redevelopment of Arnold House in the fast-growing ‘Tech-City’ area of London. The former warehouse now contains a 75,000 sq.ft. stand-out office and retail space.

The £15m project included a three-story extension reflecting the design of the existing building. It combined its current industrial impression with a high standard modern workplace environment to cater for the thriving technology and media businesses in South Shoreditch.

Working closely with Buckley Gray Yeoman architects, the team at Gilbert-Ash transformed the seven-story building to reveal collaborative open-plan spaces with exposed concrete columns and efficient floor plates. High-ceilings and significant natural light adds to the development to create a contemporary environment.

The ground floor, encompassing retail outlets and a spacious reception area, includes a curtain wall glazing exterior and black steel cladding panels for the signage zone. The façade also incorporates brick cladding and brick slip panels over new external walls. An inverted roof with decking has created terrace spaces, with tenants able to enjoy views of the Shoreditch streetscape.

Gerard Mullan, Gilbert-Ash Project Manager, commented, “The final internal and external Arnold House refurbishment works well in the surrounding modern Tech-City environment. The contemporary space has been carefully constructed to keep the industrial style of the building but with additional features you would expect in a productive, collaborative space. From the ground floor to the roof terrace and landscaped courtyard, we aimed to create a space that would meet the needs of today’s modern, flexible workforce. The building includes office space with retail units on the ground floor in a fantastic location, right in the heart of Tech City.”

Located on the corner of Great Eastern Street and Holywell Lane, the new development is a BREAMM Very Good building with a WiredScore Gold certification. The building was completed and handed over on the 10^th August.

Highly detailed design, advanced logistical planning and development goes into every Gilbert-Ash project, with the team skilled in delivering the finest quality projects in the UK and globally.

For more information on Gilbert-Ash visit www.gilbert-ash.com

The post Gilbert-Ash Completes Extended Arnold House in Tech-City, London appeared first on http://ukconstructionblog.co.uk

CIM announces the Construction Marketing Awards to celebrate industry’s finest

CIM announces the Construction Marketing Awards

to celebrate industry’s finest

• Shortlist announced with 23 awards up for grabs
• Previous winners include Armitage Shanks, Kier Group and Howarth Timber
• Tickets available now for awards ceremony and gala dinner

Organised by the Chartered Institute of Marketing’s (CIM) Construction Group, the Construction Marketing Awards are the most sought-after accolade in the industry’s marketing calendar.

Celebrating creativity, innovation and effectiveness in marketing across the construction industry, the awards shine a spotlight on excellence at a business and individual level.

With a record number of entries for 2018, Mike Lomax, chair of the CIM construction group, said: “The construction sector is renowned for its innovation and creativity and when it comes to marketing, the awards confirm that the industry recognises and celebrates the insight, creativity and impact of marketers in construction. This year we’ve received the highest level of entries which reflect the very best in construction marketing talent and are a fantastic way to raise awareness of the originality across the industry.”

The year’s awards feature 23 award categories including best use of content marketing, best low, medium and high budget campaign and marketing team of the year. New for this year is the best distributor marketing campaign and small agency of the year.

A competition for the best promotional giveaway is also being held and marketers are encouraged to submit their branded products for the light-hearted contest, which last year was won by JCB. Items must be received by 26 November.

Mike added: “Judged by some of the leading figures from brands such as Tarmac Cement, BMI group, MRA marketing from across construction and marketing, the Construction Marketing Awards set the benchmark for marketing success in the construction sector.

“We look forward to celebrating with guests at the annual awards ceremony and honouring marketing excellence across the built environment.”

The Construction Marketing Awards Gala Dinner takes place on Thursday 29th November at Hilton London Bankside, 2-8 Great Suffolk Street, London. Tickets can be booked individually or in tables of 10 and 12.

Visit www.cmawards.co.uk to book tickets, view the shortlist and for details of the promotional giveaway competition.

The post CIM announces the Construction Marketing Awards to celebrate industry’s finest appeared first on http://ukconstructionblog.co.uk

TSA steps up the campaign to halt equipment theft

New advice available for site staff and managers to download

The Survey Association (TSA) is sharing its latest anti-theft Briefing Note with the wider construction and engineering industry in a bid to deter opportunistic crime and aid the recovery of stolen equipment. ­­­

A new document, endorsed by crime prevention experts, SmartWater contains information to help companies review their security, with advice on safeguarding high value survey instruments routinely targeted by thieves.

The free to download Briefing Note, includes strategies to protect equipment from theft whilst onsite and when transported in a vehicle.

In addition, and also free to download, is a checklist for employees that could be shared on staff noticed boards. If a theft occurs, personal safety and obtaining good evidence should be the main considerations.

Both documents and others on a range of technical topics can be downloaded at https://www.tsa-uk.org.uk/downloads/

A three-year agreement between TSA and SmartWater, sponsored by the leading manufacturers, is the first, co-ordinated response to thieves that persistently target surveyors.

Information submitted through SmartWater’s Intelligence Portal is shared with the police to identify crime hotspots, emerging crime trends and possible links to current investigations.

TSA manager Rachel Tyrrell said, “Theft of equipment is not limited to the surveying profession which is why we are sharing our crime prevention advice with the wider industry.

“TSA Members, non-Member companies, and those in the wider construction and engineering industry, can download our documents and report incidents of theft through the Intelligence Portal to ensure the whole picture is captured.”

To submit information on equipment theft email TSA office@tsa-uk.org.uk

The post TSA steps up the campaign to halt equipment theft appeared first on http://ukconstructionblog.co.uk

Roof Flashing 101: Everything You Need to Know

Are you having problems with water dripping from the ceiling after every rain shower? If you are, then there is something wrong with the roof. Well, not “something,” since it’s most likely that you are either missing the flashings or they are severely damaged so they do not perform their main function. In case you are wondering what flashings are exactly, they are a form of isolation that ensures your roof does not leak. It is mostly installed on its edges and more importantly, around any openings in the roof, such as the chimney, skylight or the ventilation pipe. Basically, flashings prevent the water from seeping through the smallest of holes that might exist in your roof structure. If you thought that you need not read on, you were wrong, as flashings are much more complex than this. They serve other purposes and can come in a number of shapes and functions.

Directing water to the gutter

 

Despite its primary role, flashings can have an additional function on roofs with two or more slopes. Since they are installed at the seams of the roof, they intersect to form a provisional drain that can direct water downwards into the gutter. This is really useful because it does away with the need of installing additional gutters for larger houses and the ones with zig-zag roofs and gables.

Chimney flashing

The oldest and the most common type of flashing is the chimney flashing. It is at the same time the most intricate kind of flashing in terms of the shape. It is flat at the place where the chimney protrudes from the roof structure. Then it is diagonal, or step flashing as it is called, along the steep edges of the chimney and the roof and finally there is saddle flashing at the very top. Because the angles are hard to cover, the flashing on the chimney is let into the mortar in order for it to stick better. This way, rainwater simply has nowhere else to go but down the roof and into the horizontal gutter.

Skylights

For some reason, people who have slated roofs in their homes always opt to install skylight no matter the cost. The aesthetic appeal is undisputable, but they do not think that such a window set at an angle is at the mercy of the elements. Were it not for skylight flashing, the highest room in the house would turn into a pool. Most skylights come with integrated flashing, but their curves are flashed additionally just in order to be safe. The method of this particular flashing is similar to the one used for chimneys.

Lead flashing

The material used for flashing is mostly lead, but nowadays there is also flashing made from plastic, rubber, and zinc. However, there is a good reason why lead is the oldest in use material for flashing. It has a high density, but it can be easily worked with, as well as being durable and lasting for over a hundred years. This is especially important in places such as Australia, where roofs have to withstand the relentless pounding of the elements season after season. This is why any good quality lead flashings in Sydney must have environmental credentials to ensure the purity of the lead that is reusable. This way, it will be considered a green building material with a low carbon print.

Easy to install

Even lead flashings are surprisingly easy to install. They are malleable so putting them into place is not as hard as it seems, but it still requires an expert hand. Flashings are cut from pre-fabricated rolls of metal so there is no delay at the construction site waiting for them to be made.

Vent pipe flashing

Many houses today are being refitted with new exhaust hoods that need vents. These are often drilled straight through the roof construction and left like that by the handymen. They do put some water protection, but it is insufficient as only a flashing can permanently seal such holes off. Specially designed vent pipe flashings have a cone base which is set directly into the shingles. It is further strengthened with a second layer of counter flashing. In general, the smaller the hole, the harder it is to seal it off.

Protecting the drip edge

So far we have only discussed roof seams. Water actually quite often penetrates the roof at the very edge. This is called a drip edge as it directs the water down towards the gutters. Since it is mostly made of wood, poor construction gets this wood into contact with water and it slowly rots away. That is why a narrow layer of flashing is installed here, so as to prevent drip edges from deteriorating.

The next time you clean the gutters inspect the state of your flashings and if you notice a problem, tend to it immediately. Any failure to immediately react can result in irreversible water damage to the roof structure.

 

 

Liam Smith is a young and aspiring Australian blogger with a passion for everything related to home improvement, design and style. He has a B.Sc. in Interior design and is an avid reader.

https://twitter.com/LiamSmith2034

https://www.linkedin.com/in/liamsmith2034

The post Roof Flashing 101: Everything You Need to Know appeared first on http://ukconstructionblog.co.uk

Clients fastest payers among Build UK members

Toshiba scraps £15bn Moorside nuclear power station plan

Are you complying with the Working at Height Regulations 2005? Read the Essential Guidelines

Are you complying with the Working at Height Regulations 2005? Read the Essential Guidelines

Health & Safety Executive (HSE) have stated that working at height is the leading cause of death and serious injury in the construction industry.  Did you know that it is responsible for 28% of fatal injuries in working environments? This is due to both the risk of falling, and objects being dropped from above. With this in mind, it is essential for any person employed in construction to have a thorough understanding of the Working at Height Regulations 2005.

What are the Work at Height Regulations?

These regulations set out a list of rules that should be followed in order to avoid injury. The rules are mandatory for employers or those in charge of working at height, and can be enforced by law. Whether there is a risk of falling from a ladder, from the edge of a structure, or through an opening at ground level, the rules always apply.

How do you comply with the Regulations?

A basic understanding of hierarchy within the regulations is a good place to start. Here’s the hierarchy of control measures explained:

• Firstly, you should try to avoid any work at height if at all possible. This could be achieved by using extended tools rather than ladders, or by lowering items to ground level before carrying out repairs.
• When working at height is unavoidable, you are required to do everything possible to eliminate the risks to employees. This could involve working from a balcony, or providing machinery with guards/rails (e.g. PASMA Mobile Access Tower)
• When risks cannot be avoided, you will need to minimise the distance and consequences of a fall. In order to do this you would need to research options such as netting, airbags, harnesses and Personal Protective Equipment.

What should I do next?

1. Undertake a risk assessment

Ensure you have identified any hazards and the employees at risk. Based on this, you will need to put in place suitable precautions. Be aware that you are required to record your findings if you have five or more employees.

2. Ensure your staff are competent

Are the staff working at height experienced? Do they have the necessary skills and knowledge to perform the task safely? The level of competence depends upon the complexity of the job. To understand more about this, read the HSE guide to competence.

Some jobs may only require basic training, such as guidance from a senior employee. Technical tasks will require a higher degree of training, such as completing a course on the safe use of ladders/working at height.

Any staff involved in assembling, dismantling, inspecting or moving mobile access towers should complete a PASMA training course, such as the PASMA Tower for Users Course.

3. Equip your employees with appropriate safety tools

You are required to provide proper safety equipment for your staff. Each task is different, and you’ll need to make sure that you choose the best option for the job. A guardrail or mobile access tower would be one of the safest measures. However, sometimes this may not be feasible and you would then need to use PPE, such as safety harnesses.

4. Regularly inspect and maintain equipment

Once you have the ladders, PPE, guard rails or access towers, you shouldn’t simply assume the risk has been negated. The equipment may move, degrade or break over time. Make sure you have someone trained to inspect the gear and that this is done on a regular basis.

By following the steps above, you’re helping to ensure that you are working within the law and prioritising the safety of employees.

This article was written by The Hireman, a tool hire and safety training company based in London.

The post Are you complying with the Working at Height Regulations 2005? Read the Essential Guidelines appeared first on http://ukconstructionblog.co.uk

Chinese contractor starts first Liverpool major project

Paving Chester le Street

Paving Chester le Street Project

Paving Chester le Street. Another satisfied customer for our Paving services in Chester le Street. This particular project involved us laying 80m2 of Bradstone rainbow polished flagstones with brindle kerb and edging. In addition, we added an artificial lawn area with 26mm of Wonder yarn.

Below is the customer’s comments after we finished the project.

Having recently had my back garden fully landscaped, I am extremely satisfied with the work done. From the early planning stage to completion, everyone worked with interest and enthusiasm. I was very impressed with the quality of workmanship of all involved, they showed clear pride in their work and were always pleasant and friendly.They have created for us a garden that will give us pleasure for many years to come. I have no hesitation in recommending them for any landscaping work.

Thanks, Graeme

Bradstone Rainbow Polished Paving

The Bradstone Rainbow polished paving is absolutely stunning. With the all the stunning colours and veining variations of sandstone to make your patio area not only look good but unique too. We combined the different sizes of flags available to make the area look even more appealing to the eye and bespoke.

Bradstone Rainbow paving certainly is a refined and elegant paving which can create a stunning area for any garden.

LazyLawn WonderYarn

For the artificial lawn area, we used WonderYarn 26mm by LazyLawn. This brand of artificial grass is known for its quality of product and great guarantees. There are many different pile heights, textures and colours available in the LazyLawn range. However, the WonderYarn is most definitely our most popular for its very realistic looks.

Find out more

If you would like to find out more about our services, please take a look around our website

Keep informed of our latest news

Finally, if you would like to keep informed of all our latest news, please join our Facebook Page. 

The post Paving Chester le Street appeared first on Driveways, Block Paving, Patios, Newcastle, North East | Driveway Company UK.

Approaching Construction With An Environmental Mind

Approaching Construction With An Environmental Mind

 

Construction is a very environmentally intensive process, and when it’s done without the prerequisite oversight, it can lead to serious damage to the surrounding area. This post will explore the ways in which construction companies can improve their best practices to help the environment – ensuring that whatever development they’re building is in harmony with the surrounding environment.

Order the right materials

There’s substantial leeway when it comes to eco-friendly construction materials – you don’t necessarily have to opt for concrete or steel, as there are numerous eco-friendly options out there. Bamboo can be used to build eye-catching structures suitable for warmer climes while blending sawdust and concrete together can create ‘Timbercrete’ –  a much more sustainable option utilising a renewable resource.

Very few materials can match up to steel’s suitability for high-rise construction, so, if your project requires strong metal, you should opt for recycled steel – which is becoming increasingly prevalent in modern construction, especially in the form of used shipping containers.

Treat your surroundings with care

An environmental construction process requires special attention to be paid to the surrounding flora and fauna – especially if your project is situated in an area of natural beauty. Buildings in national parks, for example, have to adhere to a set of regulations to make sure they don’t detract from the beauty of the area.

You can reflect this in the construction process by minimising noise and traffic that might disturb the local wildlife, and by avoiding felling trees and vegetation clearance at all costs. This will lead to a finished product that looks like a natural addition to the area, rather than a scar on the landscape.

Incorporate natural elements

One of the major construction trends of this century involves the incorporation of natural flora into the architecture of the building. Major modern landmarks such as the Scottish Parliament Building in Edinburgh include grass roofs to help insulation in winter, as well as promote an eco-friendly ethos. Such a roof is very easy to fit and requires very little maintenance once put in place.

You can also use your building’s ‘transterior’ spaces – such as courtyards, indoor/outdoor foyers and outdoor seating areas to incorporate some plant life to help the project feel at least a little more eco-friendly. A leafy-bordered building will soften the edges, allowing for an accentuated feeling of environmental harmony.

Consider alternative methods

Last but by no means least, approaching construction with an environmental mind should also cover construction techniques themselves. An emerging option amongst new builds is modular construction, in which pre-built modules, assembled offsite, are transported to the site and added to the building.

This method drastically reduces water and electricity usage on site, as well as producing a noticeable reduction in traffic, as fewer truckloads of raw materials will be needed onsite. If you’re building in a quiet residential area or in a national park, this method should be considered to reduce the overall impact of your construction project.

 

A sensible blend of these environmental best practices will lead to your building project gaining a more harmonious relationship with its surrounds and the environment as a whole. As the world leans further towards more eco-friendly practices, it’s well worth putting some of these strategies into action.

 

 

 

Author bio:

Suhayl Laher works at Tiles Direct, one of the UK’s largest independent tile distributors and retailers – bringing design inspiration to homeowners, architects and developers.

The post Approaching Construction With An Environmental Mind appeared first on http://ukconstructionblog.co.uk

Safeguarding and prevent in the workplace top agenda at latest DTL skills forum

Keeping young people safe at work was top of the agenda at the latest Industry Skills Forum hosted by Develop Training Limited (DTL).

The event attracted senior apprenticeship and HR managers from major construction, infrastructure and utilities companies.

Safeguarding to prevent abuse and harm is a hot topic, as large firms look to take on more young apprentices under the government’s levy scheme. The round table event also highlighted Prevent, the government’s initiative to avoid radicalisation of young people.

Tanya Parkin, DTL’s HR Manager and safeguarding lead, outlined how the company is tackling the safeguarding issue as an approved apprenticeship provider. The presentation, co-hosted by Andy Holmes, DTL’s Head of Audit and Quality, raised key discussion points around the shared responsibilities of the training provider and its corporate customers.

Describing DTL’s journey since becoming an approved apprenticeship provider under the levy, Tanya said: “We have implemented a safeguarding and prevent strategy in the business. Our board of directors is really engaged with the subject, which has allowed us to roll out the strategy in our processes and training documentation.”

“Safeguarding in the workplace is focused on under 18s but not confined to that age group,” she explained. DTL relies on the government’s document Safeguarding: Keeping Children Safe in Education for its policies on keeping apprentices safe. The guidelines outline processes for recruitment and training of teaching staff and others working with young people, as well as the duties of designated responsible persons.

A second presentation by an expert in extremism outlined the risks posed by radicalisation and how the Prevent initiative operates to combat the threat. Providers such as DTL have a duty to refer young people who appear to be at risk of radicalisation to a specialist panel as well as to incorporate British values into the learning process.

To find out more about DTL and to download a range of useful resources visit www.developtraining.co.uk/safeguarding

www.developtraining.co.uk

The post Safeguarding and prevent in the workplace top agenda at latest DTL skills forum appeared first on http://ukconstructionblog.co.uk

Why a flat roof is the right choice for your home

Why a flat roof is the right choice for your home

Are you in the market for a new roof? Maybe you are after a design change or you simply want to replace an old roof that is damaged. A flat roof is a great option for your home and here are the reasons why:

They are cost-effective

Flat roofs are cheaper than pitched roofs – so if you’re budgeting for a roof and don’t want to break the bank, a flat roof is the way to go.

A pitched roof may be traditional but it will cost you thousands more for the same area you want covered.

Speaking about costs, the cover of your flat roof can also vary. According to Home Building and Renovating, a flat roof cover can cost from around £35/m² up to £80/m². They also outline the different coverings available like torch-on felt which is the cheapest covering, mastic asphalt which is potentially the longest lasting, EPDM rubberised roofing which is widely used and easy to install, single ply membranes which are fairly expensive, and liquid roofs which are expensive and complex. Make sure you always discuss materials with your builder and make sure you get quality at a reasonable price.

They give you space

Flat roofs provide a large amount flexibility and they free up internal space. They also offer the impression of a sleeker look compared to bulkier pitched roofs, making your home look modern and spacious.

Attics and lofts are more easily available and accessible with a flat roof than with a pitched roof that produces sloped walls. This means that you can easily convert your attic or loft into another bedroom or living space and not have to worry about the interior being too cramped – something to definitely consider if you are wanting to add another room to your home in the future and appreciate the maximum use of interior space.

With a flat roof you can place your air conditioning units with ease, and even better, on top of your flat roof, you can install some solar panels that are more hidden than ones on pitched roofs – something to think about if you want solar power energy without having to sacrifice the outside appearance of your home.

A rooftop garden is another great idea that can be achieved if you have a flat roof. Perfect for green thumbs and those aspiring to do a little gardening a week, a flat roof provides the perfect space for a living garden on top of your home. Gardening know-how has a very useful guide for those interested in starting a rooftop garden. They suggest checking with your local authorities, rental property rules or homeowner association regulations to see if you will be able to make a rooftop garden in the first place. They also suggest that you try to use as little weight as possible and that you should use plastic, fiberglass or foam planting containers and that you should avoid using pavers and regular garden dirt as lightweight potting soil will be better. Using Styrofoam peanuts for drainage rather than rocks or pottery shards can also reduce the weight of your garden on your roof for some extra reassurance and safety.  Some benefits of a rooftop garden other than scenery include:

• Reducing the amount of stormwater runoff, protecting your surroundings from damage and possible flooding
• Creating a habitat for animals including birds, butterflies and bees
• Providing an outdoor space for you and your family to enjoy and relax in
• Improving the air quality of your surroundings
• Having the ability to grow fruit and vegetables on your roof, and if you can build a lightweight greenhouse on your roof you can have access to food all year round
• Gaining quality flora that you can use for decoration in your own home or give to friends and family as gifts

 

Check out these rooftop gardens and gather some inspiration for your home!

Flat roofs are definitely versatile and you can be creative with the space they provide compared to other roof designs out there – just think of the possibilities!

Easy to install

Flat roofs have a faster and less disruptive installation process and a plain structure means fewer materials are needed. Pitched roofs take comparatively longer to construct and complete and require more intensive labour which may cause interruptions during construction time.

Wind Resistance

You won’t have to worry about shingles falling off anymore as flat roofs are perfect for wind resistance, especially when windstorms hit. If you live in the UK you will know that the wind here can be dramatic and long-lasting. A flat roof can safely be exposed to strong winds without you worrying about it needing to get repaired afterward.

Durable

Since flat roofs don’t take the wind damage that pitched roofs do, flat roofs are expected to last 30 years or more. Checking your roof every now and then will help you access how long your flat roof has before you will need to either repair it or get it fixed.

Design

Homify Online point out that flat roofs are everywhere at the moment and that they are trendy with people desiring contemporary architecture. They describe flat roofs as startlingly elegant as the straight lines and right angles are distinctive, strong and bold.

Even if you don’t want to commit to a whole new roof but would like one as an extension piece, consider getting a flat roof on a conservatory or garage. This can give your home depth and a very sleek modern design.

This semi-detached suburban home has had a kitchen extension built on the back of the building with a flat roof. Notice the artistic contrast of shapes and lines which creates a modern aesthetic appeal.

You can be more involved with the design of your flat roof than you think and can ask for your roof to be built with a slight slope so rain can drain away easily. You can also get some skylights installed or have a glass flat roof that will create an uplifting amount of natural light in your home.

Specialists will be needed if you are considering adding glass to your roof as to limit heat loss and the possibility of cracks appearing over time. General roof repairs may need to be done every so often as well, so make sure you find a reliable company that can offer you a great deal. Flat roof repairs in Newcastle Upon Tyne can be easily achieved as there are many local companies in the surrounding area that specialise in flat roofs and have years of experience. Just look around for companies that have repaired flat roofs previously and have a proven and positive track record of satisfying customers.

Is it Right for You?

If you are looking for a change in roof design, whether it be for appearance or practicality, flat roofs are one of the best options for your home.

Just look at everything you can do with a flat roof! Create yourself a roof garden or have windows that shine in natural light without anything obstructing your view – there are so many positives that flat roofs have, you just have to browse around for a great deal!

 What are your thoughts on flat roofs and are you considering getting one for your home?

The post Why a flat roof is the right choice for your home appeared first on http://ukconstructionblog.co.uk

Approaching Construction With An Environmental Mind

The post Approaching Construction With An Environmental Mind appeared first on http://ukconstructionblog.co.uk

Survey reveals that many are leaving it too late to secure their homes

With the night’s drawing in and the clocks set to go back, National Home Security Month comes at the perfect time to remind the public of the importance of home security.

A recent survey of nearly 600 tradespeople found that 85% said their customers only asked them to fit security products following a break-in to their property.

The survey, carried out by leading online supplier, IronmongeryDirect, also revealed that only one in three tradespeople feel ‘very confident’ when advising customers on better ways to secure their home. In addition, only 14% said they felt confident advising customers on smart security products.

Research by the National Home Security Month[1] campaign shows that a home is five times more likely to be burgled if no security measures are in place against those with two or three measures taken.

The top three concerns among tradespeople’s customers, as revealed in the IronmongeryDirect survey, were poor window security, poor door security and a lack of alarm systems.

When the Office of National Statistics (ONS) released its latest crime statistics earlier this year, it revealed that 1 in every 50 homes in England and Wales were burgled in the previous 12-month period.

An additional online poll in support of National Home Security Month found that 71% of respondents felt their home wasn’t secure enough.

Wayne Lysaght-Mason, Managing Director at IronmongeryDirect, said: “Certain parts of a property are more vulnerable to a break-in than others, with doors and windows obviously being the most susceptible, while dark areas outside provide the ideal cover for intruders.

“To address these vulnerabilities, there is a wide range of products available to help keep a building safe and secure – from a basic lock to sophisticated alarm systems. Increasingly, homeowners are also switching to smart technology products providing remote monitoring to secure their property.”

For any advice and support on the best products to enhance the security of a property, contact our helpdesk on 0800 168 28 28 or visit IronmongeryDirect.com.

You can also view our latest infographic which reveals tradespeople’s biggest concerns and the most popular home security products

[1] http://www.homesecuritymonth.com/

The post Survey reveals that many are leaving it too late to secure their homes appeared first on http://ukconstructionblog.co.uk