Monday, May 30, 2016

One Third Of British Workers Admit To A ‘Three Meal at Desk Day’ At Least Twice A Week

New research by a money saving website in the UK has discovered that over one third of workers in Briton have to eat breakfast, lunch and dinner at work at least twice a week. Furthermore it was found that on average Britons work 12 hours more per week than they are contracted too. 

Workers across the country have admitted that they often find themselves consuming all three of their daily meals whilst at work, according to new research by a money saving website in the UK.

The team at www.VoucherCodesPro.co.uk conducted the research as part of an ongoing study into the average Britons working day. A total of 2,015 UK-based workers aged 18 and over, all of whom stated they were in full-time work, were quizzed about their average working week. Respondents polled in the study were from a wide variety of professions.

Initially all respondents were asked how often they found themselves working unpaid overtime in order to complete their assigned work. 87%, the majority, stated they worked over their working hours ‘very frequently- at least once a week’. Following on from this, participants were asked if this overtime was voluntary; 61% told researchers it was, whilst the remaining 39% admitted they felt pressured by their employers or manager to work the extra, unpaid, hours.

Researchers then asked ‘Roughly how much overtime do you work in a typical week?’ The collated results showed that the average worker worked 12 hours more than they were contracted too. All respondents were then asked ‘Do you often have to eat meals at work?’ to which over one third (34%) confessed that they consume all three of their meals within their work environment around twice per week.

Finally, to find which profession found themselves eating all three meals the most often at work, participants were asked to provide which sector they worked in. The following emerged as the top 5:

  1. Construction workers– 23%
  2. Doctors/Nurses – 21%
  3. Chefs/Cooks – 19%
  4. Lawyers/Solicitors – 16%
  5. Lorry drivers – 13%

George Charles, spokesperson for www.VoucherCodesPro.co.uk, made the following comments:

“There is such a thing as too much work; and when you find yourself eating breakfast, lunch AND dinner at your workplace, it should probably be a warning sign that you’re pushing yourself too hard. I am all for voluntary overtime on occasion in order to prove to employers how motivated and dedicated to your career you are, but when you begin to have no time for yourself or a social life that’s just not okay.

“Some professions obviously do call for longer hours such as doctors, but this is why we have to treat them with the upmost respect. Eating all three of your meals in a massive rush while standing up or sitting at your desk isn’t healthy or fun.”


The post One Third Of British Workers Admit To A ‘Three Meal at Desk Day’ At Least Twice A Week appeared first on http://ukconstructionblog.co.uk

Thursday, May 26, 2016

https://t.co/KnUeev4eGp thanks for following us! Have a great day :) #pavingcontractor


from Twitter https://twitter.com/drivewaysuk

May 26, 2016 at 11:40AM

Chubb Breaks Ground on New High-Performance Blackburn Development

BLACKBURN, England, May, 2016 – Chubb Fire & Security Limited, a leading provider of security and fire-safety solutions for businesses and industry, held a groundbreaking ceremony for a new high-performance workspace in Blackburn. The project will transform Chubb’s existing Blackburn office campus into an advanced, integrated and sustainable space for Chubb, as well as UK affiliates of Otis Limited and Carrier Controls Limited, and serve as a showcase for the capabilities of all three brands. Chubb is a part of UTC Climate, Controls & Security, a unit of United Technologies Corp. (NYSE: UTX).

Alastair Reynolds, managing director of Chubb Fire & Security said, “This is an exciting day for our company. With this new building we are creating a safer, smarter and more sustainable environment that will be a great place for our employees to work, and an asset to the local community in terms of our efforts to blend in with the local environment, and also the investment in Blackburn.”

IMG_0022The building will be constructed by Lancashire-based nationwide contractors, investors and developers, Barnfield Construction, and has the full backing of Blackburn with Darwen Council. Councillor Phil Riley, Blackburn with Darwen Council’s Executive Member for Regeneration, said, “This is great news for the borough, securing jobs and opportunities for local people. Blackburn with Darwen is home to many national and international companies which are bringing more investment and prosperity to the area and I look forward to seeing this development start.”

Steve Riley, contracts director of Barnfield Construction said, “On behalf of us all at Barnfield we’re delighted to have been awarded the contract to construct the brand new 55,000 square foot offices for such a prestigious company. The first of the three former buildings has already been demolished to make way for Chubb’s brand new facility.”

The development, which will involve the demolition of three existing Chubb buildings on the Shadsworth Business Park and temporary relocation of employees whilst work is undertaken, will result in a modern and a high-performance building for hundreds of employees working in information technology, finance, supply chain and customer service. It will also be the new home for Chubb Systems and Chubb Community Care, including their research, development and engineering teams.

“This development demonstrates our commitment to green building technology – it will incorporate a number of the most modern and eco-friendly technologies possible to provide our employees with an environmentally responsible, smart and energy-efficient workplace for them to enjoy. We are aiming for a completion date of summer 2017,” added Reynolds. “This is the culmination of many years of hard work for the Chubb team of which I am immensely proud.”


The post Chubb Breaks Ground on New High-Performance Blackburn Development appeared first on http://ukconstructionblog.co.uk

Wednesday, May 25, 2016

Water your Landscape Naturally with a Porous Asphalt Parking Lot

porous-asphalt.-contractors-waukesha-milwaukee-madison.jpgDespite the large amounts of year-round precipitation we receive in Milwaukee, Waukesha and Madison, water is still a valuable resource to be conserved and carefully managed. One way to help our environment is to consider porous asphalt for your next parking lot or driveway project, either at home or at work.

At Wolf Paving, we have been providing paving solutions for clients for 75 years and we are proud to offer porous asphalt pavement and green solutions that focus on the environment. 

Here are a few things you should know about porous asphalt pavement if you are considering a new pavement surface and are interested in saving money in the long-run, improving the local ecosystem and getting financial and tax incentives with storm-water management improvements.

What is Porous Pavement?

Porous pavement allows water from rain or snow melt to drain through the pavement surface into a stone recharge bed, and filter back into the soil and groundwater below.

asphalt-contractor-what-is-porous-asphalt.png

Porous pavement allows water to flow through it rather than shedding water, reducing water runoff, eliminating slipping or hydroplaning, and returning water naturally to the water table.

Why Should You Consider Porous Pavement For Your Residential Asphalt Driveway?

Porous asphalt pavement is a great choice for your home because over time, it is a sound investment.

  • It can last up to twenty years before showing any cracks or potholes.
  • It is a durable product.
  • With proper maintenance, it can effectively manage rainwater distribution.
  • It helps to preserve landscape features, like large trees, can helps naturally return water to the ecosystem.

Request more information about porous asphalt pavement or get a free paving estimate.

Porous Pavement and Your Commercial Asphalt Parking Lot Installation Project

In addition to the environmental benefits and long life that porous asphalt offers, there are also significant cost savings that make it a great choice for larger commercial projects.

porous-asphalt-parking-lot-can-save-you-money.png

Certain local governments charge developers storm-water impact fees when water run off from parking lots overwhelms the storm sewer system.

These impact fees can be eliminated by using porous asphalt.

  

porous-asphalt-good-for-the-environment.png

Porous asphalt also cuts costs by eliminating the need to install a storm-water management solution like a detention basin or retention pond.

It is good for the environment and storm-water management.

 

porous-asphalt-good-for-local-ecosystem.png

This elimination gives you more useable real estate to work with - the land that you would need for the retention pond can be developed and used in other ways. Moreover, it can help naturally water your landscaping, trees and foliage. 

 

Aspects of porous asphalt parking lot installation like the underlying stone bed are more expensive than conventional construction, but these costs are more than offset by benefits mentioned above. Overall, a porous asphalt driveway or parking lot is much less expensive.

The Expert Asphalt Parking Lot Installation Process

Porous asphalt installation is a little different than a conventional asphalt parking lot installation. Here’s what the process will be like:

WOLF_asphalt-pavement-contractors1.png

A stone bed must be planned and installed beneath the surface of the pavement, and any drainage issues within the pavement surface must be considered.

The size and depth of the stone bed must be designed so that the water level never rises into the asphalt.

WOLF_asphalt-pavement-contractors2.pngWhen it is time to lay the surface, porous asphalt mix contains less finely crushed filler between its aggregate than in regular asphalt. This creates narrow pathways for rainfall and snowmelt to travel downward into the soil. Choosing a contractor with the ability to create their own asphalt mix will ensure that you get the best products - and results- possible.

 

If you're considering repaving your parking lot or are developing a plan to make the most of your development property, consider porous asphalt. Let the paving professionals at Wolf Paving help you discover the cost benefits and environmental benefits that this asphalt paving solution can offer.

With Asphalt Paving, It’s Easy to Request A Free Estimate

If you have any questions about the benefits of asphalt paving or are interested in a free asphalt paving estimate, please contact us today!

With 75 years of asphalt paving experience, from highways to driveways, we are your local source for all of your asphalt paving needs. Wolf Paving offers professional paving services from Milwaukee to Madison, and everywhere in between, including all areas around: Sun Prairie, Oconomowoc and Waukesha.

It’s never too early or too late to request a free paving estimate. Call Wolf Paving today. For the Milwaukee area, call us at 262-965-2121. For the Madison area, call us at 608-249-7931.

Permeable pavement brochure

 


The post Water your Landscape Naturally with a Porous Asphalt Parking Lot appeared first on http://www.wolfpaving.com/blog

https://t.co/ZfgAll5aYM thanks for following us! Have a great day :) #pavingcontractor


from Twitter https://twitter.com/drivewaysuk

May 25, 2016 at 11:13AM

Builders confirmed for £14bn Wylfa nuclear power station

Monday, May 23, 2016

https://t.co/nKhHFJKlj7 thanks for following us! Have a great day :) #pavingcontractor


from Twitter https://twitter.com/drivewaysuk

May 24, 2016 at 02:08AM

BREXIT: its impact on the design and construction sector

–       Members of the design and construction sector are welcome to attend this debate on Wednesday 15 June at the University of Huddersfield

–       The debate will be webcast

CAN Britain build a better future in or out of the EU?  The likely impact on the UK construction sector of either BREXIT or a vote to remain in Europe is to be debated at a special University of Huddersfield event featuring leading industry figures.

Titled BREXIT – it’s impact on the Design and Construction sector, the debate takes place on Wednesday 15 June (17:30–19:00) at the University’s 3M Buckley Innovation Centre.

In the chair will be Bernard Ainsworth, who has been in the construction industry for over 40 years, the majority of those spent with firm J. Laing.  He has led the delivery of many major projects, which have included the Millennium Dome at Greenwich, for which he received an OBE.  He has also been awarded an Honorary Doctorate by the University of Huddersfield.

Also among those taking part will be Peter Cartwright, director of the architectural practice Cartwright Pickard, for which he heads the  Leeds and Manchester offices; plus Mike Connolly, a director of multi-national infrastructure firm Turner and Townsend.

Also confirmed for the panel is Christopher Bovis, who is Professor of Business Law at the Business School of the University of Hull.  International business and trade law and European Union law are among his specialties.

One of the organisers of the free event is Patricia Tzortzopoulos, who is is Professor of Integrated Design, and Head of Department of Architecture and 3D Design in the University of Huddersfield’s School of Art, Design and Architecture.

“The idea is to provide people with an opportunity to look at the impact of Brexit in terms of the construction industry.  We will have a group of people pro and a group of people against, so we have a balanced argument.  Just a week before EU referendum, it will spark discussion and provide a forum for people to share their views.”

Opinion polls have been showing that up to 85% of people in the construction industry want the UK to remain in the EU.  Now, the University of Huddersfield event will be a discussion between industry and academic experts on the potential impact of BREXIT on the sector.

There have been fears that BREXIT could it worsen the construction sector’s skills shortage and constrain investment in new housebuilding.  There are also claims that changes, in taxation and restrictions on labour migration from other EU states affect the cost of construction projects.  The event on 15 June will explore whether such fears are justified.

·       A place at the event can be registered online.  The debate is to be webcast live via AdobeConnect.  Attendees will also be able to browse large numbers of posters, architectural models and other presentations that form the School of Art, Design and Architecture’s final-year undergraduate show.


The post BREXIT: its impact on the design and construction sector appeared first on http://ukconstructionblog.co.uk

Friday, May 20, 2016

The New Industrial Revolution

Many commercial, customer facing businesses have been disrupted by the notion of a comprehensive customer ‘experience’ that has been introduced largely by tech giants Apple and Google. In view of this, they are presented with customers and clients that have an insatiable appetite for a new ‘experience’. The challenge inherently begins with the business premises themselves, they need to hint towards the promise of being ‘interestingly different’ as we are all aware of the old cliché, “first impressions count”.

The space that a commercial business occupies has a number of requirements, it needs to be both functional and aesthetically pleasing but it also must carry the energy of the brand. The premises are integral to brand perception as well as productivity levels and staff morale. They need to be authentic; does this mean raw? Has the demand for authenticity caused us to shun whimsical and bohemian trends that have been favoured of late and revert to materials that are raw and elemental? These kind of materials only serve to embark a message of transparency; they are not masking themselves or dressing themselves up – they send a message of brand integrity.

The dynamic around industrial material has changed, no longer considered cold and necessary. The once clinical ambience of such materials are now bringing a much warmer and more sentimental, almost residential energy to commercial workspaces.

The term ‘industrial design’ is more than appropriate when talking about new trends in commercial spaces. Much more than an image, materials within industrial design serve to optimise function and value. I’m talking in particular about materials such as concrete, Corian, metals and brick. As separate entities, all of the materials have function and purpose, which will be explained shortly in their own right; but when used together they offer a contemporary combination of textures that has an underlying accent of masculine strength.

Commercial spaces are usually exposed to high traffic and for this reason they need to be adorned with materials that with withstand this. Flooring materials such as tiles and hard wood are being ditched for concrete. Usually found ‘polished’ when used within a space, concrete offers itself as a highly durable flooring option that is low maintenance and sustainable. It also comes with eco credentials, another important factor in todays ‘green’ obsessed world. Concrete is being increasingly used as a versatile option for interiors; as well as being used as a flooring option, it has also been known to be used on walls.

“As on any large development, we have used concrete extensively,” says Phil Sullivan, senior projects director at Argent. “It’s in the groundworks, big retaining structures, basements, embankments and roadways. But I have been privileged to work with some very talented engineers and architects who are really pushing boundaries and showing what can be done with concrete. I’ve learned a lot about the way the material can be used – especially within buildings from a sustainability point of view.”

Contrary to popular opinion its not a cold or inviting material, it can be stained to take on colours and various finishes, such as wood or marble – perfect for high end businesses. Its ability to impact the light within a space is one of the reasons that many businesses are turning to the material. Due to its natural high light reflectivity means that natural light is amplified, having an effect on the morale of both employees and customers in the environment.

As many businesses are looking for ways to become more innovative in their approach, Corian seems to be an increasingly favoured option. It has deep seated roots in the healthcare sector due to its ability to uphold strict hygiene levels within medical and dental practices, it has now filtered into the hospitality and retail sector, as well as many corporate offices. Considered to be a quality and elite material, Corian is used in a vast number of ways.

Roz Fairbank from Superior Surfaces gives her take, “Corian has been around for a long time but I think people are only just beginning to understand its numerous applications.  One of the wonderful things about Corian is that you can thermoform it and so form it to a 3D so that it becomes one solid, seamless piece. Architects and designers are beginning to use the fabric more and more in various settings. Commercial designers are always looking for ways for a space to become more creative and Corian allows for this and stands out even against beautiful surfaces such as granite because of the flexibility it offers.”

Corian has even been used to create high tech installations, or ones that multitask as a screen by using fibre optic technology – creating a high impact space.

I wanted to touch upon glass. Perhaps not necessarily to be classed as an ‘industrial’ material, it has strong roots in the industrial trend and heavily used as an architectural feature. Using glass can transform a commercial interior into a dynamic space; it has gone far beyond being used as a simple window, but has been extended to being used as internal partitions and even entire walls, exceeding the necessary and decorate to being functional and even structural. As the era of ‘collaboration’ is upon us, glass is becoming increasingly relevant, particularly in businesses where teams are divided into different departments. It has been argued that using glass internally increases visibility, employee interaction and morale – all positive factors within any commercial space where ultimately the need to invoke the right culture to secure profits prevails.


The post The New Industrial Revolution appeared first on http://ukconstructionblog.co.uk

https://t.co/a5L676ANdW thanks for following us! Have a great day :) #pavingcontractor


from Twitter https://twitter.com/drivewaysuk

May 20, 2016 at 11:23AM

Wednesday, May 18, 2016

Asphalt Driveway Curb Appeal Improvement Tips for Homesellers

Driveway-installation-contractors-Milwaukee-Madison.jpgSpring and summer in Wisconsin the most popular time to buy or sell a home. When you are getting your home ready to list, one of the first things you need to consider is the curb appeal. If your home appeals to buyers from the minute they turn down your street, you will be ready for a quick (and profitable) sale. 

One essential aspect of curb appeal is your residential driveway - it should be clean, safe, and in great condition. If your driveway needs an update, one option to consider is asphalt paving.

Here are five reasons to consider a new residential asphalt driveway as a way to improve the curb appeal of your home:

  1. Cost: A residential asphalt driveway is more affordable to install than concrete, and is better able to handle the extreme temperature fluctuations that affect us here in the Milwaukee, Waukesha and Madison areas. This is because asphalt is a petroleum product, and is therefore more flexible. A properly installed asphalt driveway will be as durable as a concrete surface, but at a lower cost.
  2. Long Lifespan: If you complete the recommended preventative maintenance, your residential asphalt driveway will last anywhere from 12 – 35 years depending on installation, climate and usage. This long lifespan makes asphalt driveway installation a great investment. Like most elements of your home, the better you take care of it, the longer it will last.
  3. Easy Installation: An asphalt driveway is easy to install. It can usually be laid in one or two days, and ready for use in only another day or two. Concrete typically takes twice as long to lay, and takes up to a week to cure before it can be used.
  4. Simple, Affordable Maintenance: Once your new driveway is installed, proper maintenance is required to keep it in good condition, but luckily it is also quite easy. Cracks should be sealed as soon as possible using asphalt sealants, and sealcoating should take place every 3-5 years to maintain the best look and function for your driveway. At least six to nine months should pass after installation before sealant is used.
  5. Safer Winter Walking: One of the only limitations to an asphalt driveway is that black is the only color option. This dark color comes with a significant benefit, though. During the long Wisconsin winter, ice and snow will melt quickly, leading to easier snow removal and a safer walking surface.

Additional Asphalt Driveway Resources that may interest you:

Residential asphalt driveway installation is an easy way to curb appeal and convenience for Midwest homeowners - and home sellers. The price, durability, easy installation and maintenance, and the ability to melt snow quickly in the winter are all positive qualities to consider when making your choice between residential driveway surface options.

With Asphalt Paving, It’s Easy to Request A Free Estimate

If you have any questions about the benefits of asphalt paving or are interested in a free paving estimate, please contact us today. 

With 75 years of asphalt paving experience, from highways to driveways, we are your local source for all of your asphalt paving needs. Wolf Paving offers professional paving services from Milwaukee to Madison, and everywhere in between, including all areas around: Sun Prairie, Oconomowoc and Waukesha.

It’s never too early or too late to request a free paving estimate. Call Wolf Paving today. For the Milwaukee area, call us at 262-965-2121. For the Madison area, call us at 608-249-7931.

Asphalt Paving Estimate


The post Asphalt Driveway Curb Appeal Improvement Tips for Homesellers appeared first on http://www.wolfpaving.com/blog

Monday, May 16, 2016

Northern Gas Network chooses DTL for £1m operational training contract

Develop Training Ltd (DTL), the UK’s leading training and consultancy specialist, is pleased announce that it has been awarded a large scale contract for the provision of operational training to Northern Gas Networks (NGN), following a competitive tender process.

The gas distributor is responsible for the delivery of gas through some 37,000km of pipelines to over 2.7 million homes in the North East, Northern Cumbria and much of Yorkshire. NGN directly employs around 1,300 people and provides regular work to around 800 contractors.

In order to manage the learning and development of such numbers, NGN has contracted DTL to deliver gas network technical training and health & safety training.  The technical training will be conducted at DTL’s York training centre, while classroom-based learning will be delivered on-site at various NGN depots.

“We are pleased to place this contract with DTL, with whom we’ve enjoyed an excellent working relationship in the past,” said Lyndsay Ellis, Operational Training Manager for NGN, “The variety of courses DTL offers, combined with their superior facilities and what we consider to be world class trainers, made them the strongest contender for this programme of work.”

Chris Wall, Sales & Marketing Director for DTL, said: “I’m delighted that our partnership with Northern Gas Networks continues to flourish. The award of the contract followed a hard fought tender process, in which DTL’s quality of delivery and variety of programmes prevailed. We are looking forward to working closely with NGN and explore innovative training solutions for their operational training.”

The contract, which will run for an initial two year period, has an option for two one-year extensions, and has an anticipated total value of over £1m. Training is set to commence in May 2016.


The post Northern Gas Network chooses DTL for £1m operational training contract appeared first on http://ukconstructionblog.co.uk

Sunday, May 15, 2016

Government construction targets impossible due to a lack of ‘feet on the ground’

A lack of manpower is the biggest concern for the Government in meeting construction targets, according to construction and rail recruitment specialists, One Way.

This comes in light of a recent survey from property consultants McBains Cooper which revealed that just three in ten of England’s housebuilders believe the Government’s target of building one million homes by 2020 can be achieved. The report listed the biggest barriers as land shortages, the slow granting of planning permission, a lack of finance and skills shortages.

However, the firm has argued that the biggest problem facing the Government’s target is the lack of ‘feet on the ground’. One Way has highlighted that these targets should have included greater consideration of the manpower requirements which will have a significant impact on productivity.

Paul Payne, managing director at One Way, comments:

“While I agree with the general concerns raised in the report from McBains Cooper, I was concerned that the issue of manpower wasn’t at the forefront of the discussion. There are numerous challenges facing the completion of these targets, but many can be addressed. While there are incentives in place to address the skills shortage – such as the upcoming apprenticeship levy – the immediate lack of feet on the ground should be the number one issue to address. Amendments to the planning permission process can be – and in some instances are already being – made and more investment can be sought, but all of this will be in vain without the people in place to fulfil projects.”

“While there’s no immediate solution to this, the fact that the Government target has been set without due consideration as to the people needed to achieve it is a concern. Yes there is a need for more homes to be built, but setting unrealistic targets isn’t a solution for an industry which has long felt the impact of a talent brain drain.”


The post Government construction targets impossible due to a lack of ‘feet on the ground’ appeared first on http://ukconstructionblog.co.uk

Thursday, May 12, 2016

How Porous Asphalt Pavement Helped Expand a Business

Over the years, Wolf Paving has completed thousands of paving jobs for residential paving, commercial paving and municipal paving clients. Here, we highlight one job that used porous asphalt paving to help one business in more than one way. Take a look.

In June of 2011, Wolf Paving was brought in as an asphalt paving subcontractor on a building addition and parking lot expansion project. But, as it turned out, this wasn’t your normal, run-of-the-mill type of project. It became a unique collaboration among a diverse and highly-talented team.

Porous Asphalt Pavement Project Details

Construction with Porous Asphalt Pavement- wolf-paving-contractors

At the time, the Wenthe-Davidson Engineering Co. of New Berlin, Wisconsin was in need of a facilities expansion in the neighborhood of 25,000sf. At first blush, engineering revealed there simply wasn’t enough usable land at the site to accommodate a new structure of that size plus the additional parking that would be needed and, still be in compliance with the areas storm water management plan. It seemed relocating to another location was the only answer, but that too proved to be an untenable, cost-prohibitive solution. And somewhere in all of this some very bright people got together around a porous asphalt pavement solution.

Mark Ellena of Ellena Engineering Consultants got the idea for a very unique and ingenious solution from a seminar he had taken on flood water management methods and procedures involving the use of porous asphalt. According to the National Asphalt Paving Association (NAPA), porous asphalt pavement has played a prominent role in the paving industry since the mid-1970s. More importantly perhaps, it’s been discovered to be an extremely cost-effective and viable solution for complex projects involving storm water management.

According to information found on NAPA’s Web site:

“With the proper design and installation, porous asphalt can provide cost-effective, attractive pavements with a life span of more than twenty years, and at the same time provide storm-water management systems that promote infiltration, improve water quality, and many times eliminate the need for a detention basin.”

Mr. Ellena brought this idea of using porous asphalt for the parking lot expansion over the floodplain to Jim Warzinski of Wolf Paving. Mark provided research and created a design based on the specifications involving the size, depth and quantity of material needed for water storage and infiltration. Jim supplied his expertise on the technical aspects of the porous asphalt product and a gradation plan that would meet Mark’s design requirements. Together, the pair provided general contractor, Anderson Ashton a compelling and winning plan by which to enable the customer to successfully complete their expansion without compromising the site’s storm water management scheme - and most likely saving the company tens of thousands, perhaps millions of dollars in the process.

Another key player in the overall solution was the Vulcan Materials Company who supplied the all-important base course or stone recharge bed called, Decco Base. This is the heart of the system which not only provides the infiltration of water but a strong sub-base for the porous asphalt. In the illustration below, you can see a cross section of the elements making up the complete solution.

Porous Asphalt Pavement Cross Section Detail-wolf-paving-asphalt-pavement

“Together, we collaborated on design and technique to meet the client’s need and delivered the solution with a personal touch," said Mark Ellena. “And It looks better than I ever thought it would look, Wolf really delivers to meet the project needs. They’re the best around.”

The following is a photo of a portion of the finished parking lot with the porous asphalt on the left and the regular asphalt pavement on the right.

Porous Asphalt Pavement and Regular Asphalt at Wenthe-Davidson

Have a storm water management challenge to your expansion or property plans? Consider a porous asphalt pavement solution, designed and installed by the experts. Request an estimate, now!

This is one of Wolf Paving's many success stories. A leading provider of residential, industrial and commercial paving solutions in Milwaukee and southern Wisconsin, Wolf Paving has built a strong reputation for exceeding client expectations through ingenuity, adaptability and old-fashioned hard work. (Not to mention some pretty effective teamwork and collaboration with some of the best engineers, contractors and industry suppliers around!)

If you’d like more information about how our team of pothole repair contractors can help your business or municipality with timely repair services, request a free estimate now so we can understand the size and scope of your project needs. 

With 75 years of asphalt paving experience, from highways to driveways, we are your local source for all of your pothole repair and asphalt paving needs.

For more information on Wolf Paving or to request a free quote for your next paving project contact one of our two offices. If you live or work in the Milwaukee area, call us at 262-965-2121. For the Madison area, call us at 608-249-7931.

Parking Lot asphalt paving estimate  


The post How Porous Asphalt Pavement Helped Expand a Business appeared first on http://www.wolfpaving.com/blog

https://t.co/wJZMn39BP8 thanks for following us! Have a great day :) #pavingcontractor


from Twitter https://twitter.com/drivewaysuk

May 12, 2016 at 03:58PM

Tuesday, May 10, 2016

‘Topping out’ ceremony concludes Oastler first phase

Topping out takes place at ground level when 16 metre steel truss is dropped into place

DSC_0047.jpg-orig DSC_0070.jpg-origA STEEL truss 16.2 metres tall that will be at the structural heart of the University of Huddersfield’s latest building was carefully lowered into place by a giant crane, guided by a team of construction workers.  But it took just a few turns of an Allen key for it to be secured by the trio of dignitaries called on to perform a special ceremony.

The event was a variant on the traditional “topping out” that marks a crucial stage in construction projects.  It usually revolves around the installation of a final beam at the top of a structure.  

On this occasion, however, the “topping out” took place at ground floor level as one of the twin trusses that will act as a frame for the main entrance to the building and support its roof was manoeuvred  into a steel “shoe” that will anchor it.  A stainless steel pin was then inserted and tightened by the Vice-Chancellor of the University, Professor Bob Cryan, the High Sherriff of West Yorkshire, Mr Chris Brown – who is also chair of the University Council – and Mr Pat Boyle, who is MD of Morgan Sindall Construction Infrastructure, the projects main contractors.

Morgan Sindall is the firm that is constructing the £27.5 million Oastler Building, which overlooks the busy Aspley Roundabout, and it was designed by Huddersfield-based architects AHR Global.  When ready for use in early 2017, it will be a new home for the study of law and the humanities at the University.

The trusses were manufactured by the Elland Steel Structures Ltd, which has fabricated 674 tonnes of components for the new building.  They were trucked to the University in the early hours of Tuesday 4 May, so as not to disrupt peak-time traffic. 

The University’s Department of Estates and Facilities encouraged the architects and the building contractors Morgan Sindall to use local manufacturers and suppliers as much as possible in the design and construction of the building.

The structure’s steel and aluminium frame will be faced with 2,092 square metres of glazing, fabricated by Huddersfield firm Dual Seal Glass Ltd and Brighouse Company HWA.  Other major contributors include the Myers Group, proprietors of Johnson’s Wellfield Quarry at Crosland Moor, Huddersfield.  It has furnished 1713 square metres of locally quarried stone and is a major supplier of concrete for the structure. At a celebration lunch following the topping out ceremony, there were guests from many of the firms and practices involved in the project, including Morgan Sindall, AHR Global and structural engineers Tim Stower and Partners.

Professor Cryan said that the new Oastler Building would be an ultra-modern structure for a dynamic university, but one that would preserve the memory of one of the most inspirational figures in the history of Huddersfield. 

Richard Oastler, who lived from 1789 to 1861 was based in Huddersfield when he began his famous campaign for a reduction in the hours worked by factory children.  He described their plight as “Yorkshire slavery”.  Oastler became known as the “Factory King”.

“As a university, it is important that we not only work for the benefit of our students, but also support the local economy,” said Professor Cryan in his speech prior to the luncheon.  “The building of this structure is a good example of those efforts and I am very glad that today that we can welcome senior figures representing key partners in the design and construction of the Oastler Building, many of them local companies.”


The post ‘Topping out’ ceremony concludes Oastler first phase appeared first on http://ukconstructionblog.co.uk

Thursday, May 5, 2016

UK’s Most Considerate Sites revealed

Four constructors triumph at Considerate Constructors Scheme National Site Awards 2016

Costain, Gentoo Construction, Robert Woodhead Ltd and Walter Thompson (Contractors) Ltd have each been awarded the prestigious title of Most Considerate Site at the Considerate Constructors Scheme’s 2016 National Site Awards.

2016 MCSThis year marks the first time four sites have won the esteemed Most Considerate Site accolade, as a result of ‘value bands’ being introduced, enabling sites to be assessed against projects of similar value.

The value bands are: Under £500k; £500k to <£5m; £5m to <£10m; £10m and over, and the award-winning sites are:

  • Denton Green Bungalows project – Robert Woodhead Ltd (under £500k)

This project involved the construction of four new-build bungalows on a brownfield site in a recognised area of social deprivation in Broxtowe, Nottinghamshire.

  • Linthorpe School Extension and Refurbishment – Walter Thompson (Contractors) Ltd (£500k to <£5m)

This project was the construction of a single-storey classroom and office extension in Linthorpe, Middlesbrough.

  • The Cheviots – Gentoo Construction (£5m to <£10m)

This project was the construction of a 40-bed extra care home, alongside six new bungalows in Ashington, Northumberland.

  • A556 Knutsford to Bowdon Improvement Scheme – Costain (£10m and over)

This scheme was the construction of a 4.7 mile section of main road, together with associated bridges and underpasses in Cheshire.

Over 3000 guests from construction sites of all different sizes attended award ceremonies held from 11-29 April in Edinburgh, London and Manchester.

This year’s National Site Awards applied to registered sites that completed in 2015.

Projects registered with the Scheme must demonstrate an appreciation of the impact of their work on the community, the environment and their workforce, and this year was no exception with around 9000 sites eligible to win a National Site Award.

The Scheme held 13 ceremonies and presented a total of 932 National Site Awards. In addition to the four Most Considerate Site awards, there were 430 Bronze, 293 Silver and 173 Gold and 32 Most Considerate Site Runners-Up.

Edward Hardy, Chief Executive of the Considerate Constructors Scheme, said: “Congratulations to each and every site receiving a 2016 National Site Award. Every year, the Scheme is taken aback by the many different ways contractors demonstrate their considerate credentials. This year has been no exception, with project teams across the UK serving as beacons of best practice.

“Special congratulations go to each of the 2016 Most Considerate Sites. These sites have shown truly exceptional performance, making tremendous efforts in going way above and beyond compliance with the Scheme – taking considerate construction to a new level.

“They have worked with enthusiasm and dedication to ensure that they showcase the very best of the construction industry, helping to make construction a more attractive career choice.

“This year’s introduction of value bands underlines that no matter what size or scale of construction site, consideration towards the community, workforce and environment makes a marked difference in improving the image of the industry.

“My congratulations again, and also my thanks to all winners for their continued commitment and hard work in striving towards an ever improving construction industry. All those winning awards this year are at very forefront of making the construction industry great and they should all be very proud of how their efforts are improving our industry’s image.”

Click here to read more about awards and search the database listing all 2016 National Site Award winners.


The post UK’s Most Considerate Sites revealed appeared first on http://ukconstructionblog.co.uk

Wednesday, May 4, 2016

Waukesha & Milwaukee Asphalt Paving Contractor Featured on Mr. Fix-It Radio Show

milwaukee-waukesha-asphalt-paving-contractors-mr-fit-it.jpgThe asphalt paving contractor experts at Wolf Paving were recently featured on WTMJ's "Mr. Fit-It" radio show for a one-hour with Milwaukee's own Tom Feiza. The program offers weekly advice on everything from home repair and improvements to do-it-yourself projects.

The focus of this recent program was on everything asphalt pavement related — from asphalt sealcoating to asphalt pothole repair and maintenance, from commercial asphalt parking lots to municipal asphalt pavement installation. As Waukesha and Milwaukee asphalt paving contractors, Wolf Paving was in-studio to answer questions from listeners.

This clip features the first segment of the radio show discussing:

Click Here to Listen to the Radio Interview Now!

Stay tuned because we will be publishing the additional segments in the coming weeks featuring call-in questions from listeners and expert answer from Wolf Paving asphalt paving professionals in Milwaukee, Waukesha and Madison:

  • Segment 1: Wolf Paving 75th Anniversary, asphalt  manufacturing, pothole repair and patching, asphalt sales.
  • Segment 2: How  can we remedy puddling (low-point) by end of our driveway/culvert? What is the infrared/reheating process
  • Segment 3: What should be done about settling asphalt and concrete by our garage?
  • Segment 4: Is there any way to redo our driveway without killing the nearby tree? Can Wolf Paving add a lane for a new garage stall? What is the history of Wolf Paving?
  • Segment 5: Our seal-coating application done previously is starting to flake, what are our options? Our garage slab and driveway are higher than house. When it comes time to redo, how high should we make the step and slope?  Our driveway has substantial cracking. Can it be re-done, re-surfaced, or should we consider addition another layer?
  • Segment 6: What is the asphalt recycling process for old asphalt and asphalt shingles. How is it environmentally friendly? 

If you’d like more information about how our team of pothole repair contractors can help your business or municipality with timely repair services, request a free estimate now so we can understand the size and scope of your project needs. 

With 75 years of asphalt paving experience, from highways to driveways, we are your local source for all of your pothole repair and asphalt paving needs.

For more information on Wolf Paving or to request a free quote for your next paving project contact one of our two offices. If you live or work in the Milwaukee area, call us at 262-965-2121. For the Madison area, call us at 608-249-7931.

Asphalt Paving Estimate

 


The post Waukesha & Milwaukee Asphalt Paving Contractor Featured on Mr. Fix-It Radio Show appeared first on http://www.wolfpaving.com/blog

Tuesday, May 3, 2016

https://t.co/SpAzckdhNH thanks for following us! Have a great day :) #pavingcontractor


from Twitter https://twitter.com/drivewaysuk

May 03, 2016 at 05:31PM

https://t.co/xx6SjmcGAk thanks for following us! Have a great day :) #pavingcontractor


from Twitter https://twitter.com/drivewaysuk

May 03, 2016 at 12:15PM

High Return on Investment Property Selling: a guide on property upgrades

Investing in properties in order to sell can be a tricky game to play if the return on investment isn’t as high as you’d hope. Upgrades can sometimes cost more than the added value to the final market price of a property. We’ve listed some of the best home improvements according to experienced real estate experts and property selling and remodelling specialists. Surprisingly, a lot of the most rewarding remodelling projects are rather low maintenance and not too costly: you don’t need a labour intensive complete property overhaul to get the most bang for your bucks.

  1. Highest long-term Return On Investment: the entry door

Replacing the entry door of a property provides a ROI of up to 98% according to data obtained by HouseLogic and is probably the best investment you could be making. Transforming the front door is efficient: it gives the home an entirely fresh look and it can improve insulation. It’s also relatively low budget: for a spend of around £1300, expect to gain a minimum of 75% of the cost in the final sale. Steel door models though are your best bet over PVC and other materials.

  1. UK’s favorite home improvement: the kitchen

Kitchens are the hub of every home and unsurprisingly, extensions and replacements are one of the UK’s most popular home improvements. It turns out that ROI is pretty good too: minor remodelling such as simply replacing the countertops, floorings or adding middle of the range appliances is enough to assure a RIO above 80%. Experts also recommend to spend a little extra on workspace and layout as flow is crucial in a kitchen. It will never need changing if done well and replacing cabinets and appliances can be done quickly for cheap if necessary.

  1. Siding replacement: opt for fiber-cement

New siding is one of the best and immediate ways to show prospective buyers that the home they’re interested in is well-maintained. As as result, ROI on new siding is also around 80% if you opt for fiber cement. Fiber cement is low maintenance, stable and extremely durable. The only downside being in the actual installation: it requires the help of a professional with the right tools and techniques which can make the overall budget creep up but be aware it will be worth it in the long run.

  1. Garage door replacement: low cost and big impression

Garage door replacement will set you up with a ROI of 80% too. It’s one of the top property remodelling investment as a middle of the range garage is relatively low priced (between £500 and £1000), installation is easy and rewarding: the entire feel of your front lawn can be changed for the best thanks to this simple home remodelling operation.


The post High Return on Investment Property Selling: a guide on property upgrades appeared first on http://ukconstructionblog.co.uk

Monday, May 2, 2016

Two huge 16.2 metre steel trusses will be lowered into position to top off Uni’s 27.5 million building

‘Topping Off’ ceremony welcomes the High Sherriff to guide the trusses into position – at 12.30pm on Today

Local firms help finish job

Uni of Hudds Oastler Building 1.jpg-orig AS an architecturally-innovative £27.5 million building at the University of Huddersfield takes shape, two giant steel trusses that will help lock the structure in place are to be installed in a special twist on the traditional ‘topping out’ ceremony.

The ‘topping out’ ceremony usually commemorates the installation of a final beam at the top of a structure.  But the two herringbone pattern trusses – 16.2 metres tall – will extend vertically from the ground floor to the roof of the new Oastler Building at the University, four levels higher.  The trusses will act as a frame for the main entrance to the building and support the roof. 

Manufactured by the Halifax-based firm Elland Steel Structures Ltd – which has fabricated 674 tonnes of components for the new building – the huge trusses will be trucked to the University in the early hours of Tuesday 4 May, so as not to disrupt peak-time traffic.  On the site of the new building, which overlooks Huddersfield’s busy Aspley roundabout on the town’s ring road, workers  for construction firm Morgan Sindall will lower the trusses from a huge crane into specially “shoes”, which will position structures in place.  

The county’s High Sherriff, Mr Chris Brown and the University’s Vice-Chancellor, Professor Bob Cryan, will then insert a bolt as a ceremonial means of marking this key phase in the completion of the building.  When ready for use at the start of 2017, the building will be a new base for the law school and for the study of humanities.

The University’s Uni of Hudds Oastler Building 2.jpg-origDepartment of Estates and Facilities encouraged Huddersfield-based architects AHR Global and building contractors Morgan Sindall to use local manufacturers and suppliers as much as possible in the design and construction of the building.

The structure’s steel and aluminium frame will be faced with 2,092 square metres of glazing, fabricated by Huddersfield firm Dual Seal Glass Ltd and Brighouse company HWA.  Other major contributors to the build include the Myers Group, proprietors of Johnson’s Wellfield Quarry at Crosland Moor, Huddersfield.  It has furnished 1713 square metres of locally quarried stone and are a major supplier of concrete for the structure.

The ‘topping out’ ceremony will welcome representatives of many of the firms and practices involved in the project, including Morgan Sindall. AHR Global and structural engineers Tim Stower and Partners Ltd.

The new building is to be named after the 19th century campaigner for factory reform Richard Oastler, who had strong Huddersfield connections.


The post Two huge 16.2 metre steel trusses will be lowered into position to top off Uni’s 27.5 million building appeared first on http://ukconstructionblog.co.uk

Looking Good After a Long Day On-Site

When you have had a long day on the construction site, it’s time to switch out into more comfortable clothes. Depending on the job you’ve been doing, your clothes are all covered in soot. Maybe you’ve been plastering, perhaps you’ve been drywalling, roofing, or even putting up steel girders. No matter what job you have been working on, it’s safe to say you’d appreciate getting out of the job-site clothes and into something more relaxing.

If you’ve got a date after a long day on the construction site, you definitely need to change out of your work clothes before meeting with your date. Be sure to check out some of the great outfits available at Boden for some of your options. Plus when you visit Groupon, you can find savings from Boden. It might feel like you are living paycheck to paycheck, but remember- your date is choosing to spend their time with you this evening, so don’t let them down by showing up like you just laid down the hammer and nail gun.

Instead of looking like this is your first date, make sure you get cleaned up after getting off of work. Take a shower, shave, put on fresh deodorant- do whatever you have to do to take the job site off of you. Aside from the physical burdens, make sure to let go of the emotional stress, too. Upset with your boss? Sad over the injury of a friend? Worried about where the next paycheck will come from once this project is complete? Be sure to leave these emotions back at your place before you go on that date.

If you can successfully transition from the worksite to a smooth at-home life, you’ll be able to pull off a career in construction just fine. The key to keeping your cool after many years in the field is knowing how to look and feel your best after a long day on-site. No matter what you worked on today, be sure to try and relax  by getting cleaned up, changing in to some fresh clothes from Boden, and treating yourself and a nice lady to a great evening out.


The post Looking Good After a Long Day On-Site appeared first on http://ukconstructionblog.co.uk

https://t.co/S6yjDr4MFN thanks for following us! Have a great day :) #pavingcontractor


from Twitter https://twitter.com/drivewaysuk

May 02, 2016 at 02:37PM

https://t.co/MzlH3e3LNC thanks for following us! Have a great day :) #pavingcontractor


from Twitter https://twitter.com/drivewaysuk

May 02, 2016 at 09:11AM

Sunday, May 1, 2016

Property Renovation Calculator Gives Homeowners Estimated Cost of Home Improvements

New Property Renovation Calculator Gives Homeowners Estimated Cost of Home Improvements

A brand new microsite has launched allowing people considering making home improvements to input information, such as the room they are looking to renovate, the size of the space and the region they live in, and then get an estimated cost for the work. Months of research have gone into making the home renovation calculator as accurate as possible.

In a bid to help people understand the cost of home improvements before they start the work, the team at www.Web-Blinds.com has designed and built a home renovation calculator, based on months of research, to help users create the property of their dreams.

The calculator initially asks users to choose the room they want to update, with a choice of the kitchen, bathroom, conservatory, bedroom, dining room or living room. They are then required to measure and enter the size of the room in metres squared (m²).

Next, users of the calculator are asked to consider whether they require a budget, mid-range or high-end finish. Finally, the region the property is located in is also needed, in order to account for the varying costs of services in different areas of the UK.  For example, the cost of renovating a 7m² bathroom, on a budget, would equate to roughly £4,175 in the North East, but would cost £5,322 in London.

Kirsty Martin, spokesperson for www.Web-Blinds.com, made the following comments on the creation of the calculator: http://www.web-blinds.com/resources/home-renovation-calculator/

“Making the decision to completely renovate a room in a house can come about for a multitude of reasons. You may be considering a house move and want to ensure that you make as much as you can from the sale, or perhaps you are a first-time buyer with limited funds and considering a fixer-upper.

“This calculator has been built to give users the chance to generate a rough estimate of the work needed to improve the room. And while we don’t know the specific tiles, taps or fixtures you want to incorporate into your lovely new room, it will give you an idea of whether or not you can afford the home of your dreams!”


The post Property Renovation Calculator Gives Homeowners Estimated Cost of Home Improvements appeared first on http://ukconstructionblog.co.uk